<<USE COURIER REGULAR 10 FONT IF YOU WOULD LIKE TO PRINT THIS DOCUMENT>>


  Trend Micro, Inc.                                    November 27, 2006

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
           Trend Micro(TM) ServerProtect(TM) for Linux(TM) 1.3
                           hot fix - Build 1385
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   NOTICE: This hot fix was developed as a workaround or solution to a 
   customer-reported problem.  As such, this hot fix has received 
   limited testing and has not been certified as an official product 
   update. Consequently, THIS HOT FIX IS PROVIDED "AS IS". TREND MICRO 
   MAKES NO WARRANTY OR PROMISE ABOUT THE OPERATION OR PERFORMANCE OF 
   THIS HOT FIX NOR DOES IT WARRANT THAT THIS HOT FIX IS ERROR FREE. TO 
   THE FULLEST EXTENT PERMITTED BY LAW, TREND MICRO DISCLAIMS ALL 
   IMPLIED AND STATUTORY WARRANTIES, INCLUDING BUT NOT LIMITED TO THE 
   IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS 
   FOR A PARTICULAR PURPOSE. 

     
     Contents
     ===================================================================
     1.  Overview of this Hot Fix Release
	 1.1 Files Included in this Release
     2.  What's New
     3.  Documentation Set
     4.  System Requirements
     5.  Installation/Un-installation
     6.  Post-installation Configuration
     7.  Known Issues
     8.  Release History
     9.  Contact Information
     10. About Trend Micro
     11. License Agreement
     ===================================================================

1. Overview of this Hot Fix Release
========================================================================
   When configuring the password of proxy authentication by using
   command "splxmain -y", the password that is encrypted is incorrect.
   Users will encounter a proxy authentication failure when performing
   a scan engine or virus pattern update.
   
   1.1 Files Included in this Release 
   ======================================================================
   Module Filename                           Build No.    
   splx_13_lx_redhat_en_hfb1385.tar.gz
   SPLX.vsapiapp/splxmain                     1385

2. What's New
========================================================================
   Prior to this fix, users would encounter a proxy authentication 
   failure when performing a scan engine or virus pattern update if they 
   configure a proxy server with authentication using the command 
   "splxmain -y". After applying this hot fix, the users can 
   successfully perform update by Web console or by command line using
   "splxmain -y".

3. Documentation Set
========================================================================
   o Readme.txt -- basic installation, known issues, release history
     and contact information 
    
   Electronic versions of the printed manuals are available at:
     http://www.trendmicro.com/download


4. System Requirements
========================================================================
   Supported Red Hat distributions:

    - Red Hat Enterprise Linux (AS, ES, WS) 3.0
    - Red Hat Enterprise Linux (AS, ES, WS) 2.1

      NOTE: Only manual and scheduled scanning is available for Red Hat
            Enterprise Linux 2.1

   Trend Micro recommends installing ServerProtect for Linux 1.3 Patch 1
   for Service Pack 1 before installing this hot fix. 
   
   
5. Installation/Un-installation
========================================================================
   Back up the original file using the "cp -p" command and replace it
   with the hot fix. Verify that the installed hot fix has the same file 
   permissions as the original file.

   To install this hot fix:

     a. Log on as root.  
   
     b. Stop the ServerProtect service.
   
        WARNING: The following command will unload the ServerProtect
                 services and will leave your system temporarily
                 unprotected.
      
        # /etc/rc.d/init.d/splx stop
   
    c. Back up the original module.
       
        # cd /opt/TrendMicro/SProtectLinux/SPLX.vsapiapp/
        # mv splxmain splxmain.bak
   
    d. Upload and copy the hot fix file to the following 
       directory:
        /opt/TrendMicro/SProtectLinux/

    e. Decompress and un-archive the hot fix file:
    
       # tar xvzf splx_13_lx_redhat_en_hfb1385.tar.gz
   
       The resulting file should be:
           
       SPLX.vsapiapp/splxmain
                  
    f. Verify whether the hot fix files have been successfully 
       updated by checking its md5 value.
   
       # cd /opt/TrendMicro/SProtectLinux/SPLX.vsapiapp/
       # md5sum splxmain
       265c8e0894fe93d26c2d7e5496b5fca0  splxmain
       
    g. Start the ServerProtect service.
   
       # /etc/rc.d/init.d/splx start     

   
   If after deployment you want to roll back to the original files,
   rename the backup file in described in Step c above.
   
   # mv splxmain.bak splxmain

  Note: Register online with Trend Micro within 30 days of installation
  to continue downloading new pattern files and product updates from the 
  Trend Micro Web site. Register during installation, or online at:

  http://olr.trendmicro.com/

        
6. Post-Installation Configuration
========================================================================
 No post-installation steps are required.

 Note: Trend Micro recommends that you update your scan engine and   
 virus pattern files immediately after installing this hot fix.


7. Known Issues
========================================================================
   There are no known issues for this hot fix release.


8. Release History
========================================================================
   See the following Web site for more information about updates
   to this product:
   http://www.trendmicro.com/download


9. Contact Information  
========================================================================
   A license to the Trend Micro software usually includes the right to 
   product updates, pattern file updates, and basic technical support 
   for one (1) year from the date of purchase only.  After the first
   year, Maintenance must be renewed on an annual basis at Trend Micro's 
   then-current Maintenance fees.

   You can contact Trend Micro via fax, phone, and email, or visit us 
   at:
 
   http://www.trendmicro.com
 
   Evaluation copies of Trend Micro products can be downloaded from our 
   Web site. 

   Global Mailing Address/Telephone numbers
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   For global contact information in the Asia/Pacific region, Australia
   and New Zealand, Europe, Latin America, and Canada, refer to:
   
   http://www.trendmicro.com/en/about/overview.htm

   The Trend Micro "About Us" screen displays. Click the appropriate 
   link in the "Contact Us" section of the screen.

   Note: This information is subject to change without notice.
         

10. About Trend Micro  
========================================================================
   Trend Micro, Inc. provides virus protection, anti-spam, and 
   content-filtering security products and services.  Trend Micro allows 
   companies worldwide to stop viruses and other malicious code from a 
   central point before they can reach the desktop.

   Copyright 2006, Trend Micro Incorporated. All rights reserved.
   Trend Micro, the t-ball logo, and ServerProtect are trademarks of 
   Trend Micro Incorporated and are registered in some jurisdictions. 
   All other marks are the trademarks or registered trademarks of their 
   respective companies.


11. License Agreement  
========================================================================
   Information about your license agreement with Trend Micro can be 
   viewed at: 

   http://www.trendmicro.com/en/purchase/license/

   Third-party licensing agreements can be viewed:   
      - By selecting the "About" option in the application user 
        interface   
      - By referring to the "Legal" page of the Getting Started Guide or     
        Administrator's Guide